Legrand CX³ Smartes Schütz 20 A, 1-polig, 230 VAC, 1 TE, CX³ with Netatmo
CX3 with Netatmo
Legrand
Legrand CX³ Smartes Schütz 20 A, 1-polig, 230 VAC, 1 TE, CX³ with Netatmo
Best.-Nr. 412171
EAN.
3414971795563
Rabattgruppe : C04
106,90 €
/
Stück
Unverbindliche Preisempfehlung
exkl. MwSt.
Teilen
Sie können nur 4 Produkte vergleichen, Sie müssen 1 entfernen, um dieses hinzuzufügen
Technische Merkmale
Bemessungsbetriebsspannung | 240-240 V |
---|---|
Bemessungsbetriebsstrom | 20 A |
Spannungsart der Betriebsspannung | AC |
Anzahl der Kontakte als Schließer | 1 |
Schieber für Handschaltung | Nein |
Breite in Teilungseinheiten | 1 |
Zusatzeinrichtungen möglich | Nein |
Schutzart (IP) | IP3X |
Breite | 17.8 mm |
Höhe | 95.9 mm |
Tiefe | 70.1 mm |
Schlagfestigkeit | IK04 |
Einsatztemperatur | -5-45 °C |
---|---|
Lagertemperatur | -40-70 °C |
Frequenz | 50-50 Hz |
Bezeichnungsangabe der Anschlussklemmen | Ja |
Farbe | grau |
RAL-Nummer | 7035 |
Halogenfrei | Ja |
Kapazität der Klemme | 0.75-6 mm² |
Verbindungsart | Kabel |
Textfeld/Beschriftungsfläche | Ja |
Montageart | DIN-Schiene |
Dokumentation
3 Dokumente
Technisches Datenblatt
Bedienungsanleitung
Technisches Datenblatt
1 Dokument
AutoCAD 3D
3 Dokumente
Konformitätserklärung
NF-NF012_3529/A1
(0.55 Mo)
Konformitätserklärung
Decl. UE RED-3906 B
(0.2 Mo)
Konformitätserklärung
OC / CB-FR_715717/A1
(0.22 Mo)
WÄHLEN SIE EINE AKTION
FAQ
- The current state of your connected contactor is shown by the light indicator located on its main button. Each press on the button changes the state of the contactor.If your contactor is set up in Peak / Off-peak mode:No light : Contactor is turned OFFBlue light blinking : Contactor is turned OFF, AUTO mode enabledGreen/Blue blinking : Contactor is turned ON, AUTO mode enabledGreen light : Contactor is turned ON (temporary override)If your contactor is set up Manual mode:No light : Contactor is turned OFFGreen light : Contactor is turned ONMehr erfahren
- A Peak / Off-peak Hours electricity contract allows you to benefit from two electricity rates depending on the time of day.If you have subscribed to an Peak / Off-peak Hours contract with your electricity supplier, your connected contactor may turn on or off automatically when the Peak or Off-peak Hours switch from your electric meter.Each press of the main button on your connected contactor changes its state: OFF (permanent), OFF AUTO, ON (temporary forced operation), ON AUTO.The Peak / Off-peak Hours operating mode is activated by default on your connected contactor and can be customized in the App settings, "Manage my house" section.Mehr erfahren
- Yes, a connected contactor can perfectly control any type of existing standard contactor (all brands, all intensities), wired on the control terminal of the connected contactor.Mehr erfahren
- If your connected contactor is set to Manual mode, each manual action is final until the next press, action in the App, or until the next event in an action schedule.If your connected contactor is set to Peak / Off-peak hours mode, each switch to Peak or Off-peak hours will automatically trigger your contactor on or off. In the event of a manual action to force the ignition temporarily (fixed green indicator), the contactor will keep this state until the next change to Peak / Off-peak hours, press the contactor, action in the App, or until 'at the next event in an action plan.In the event of manual extinction, this state will be permanently retained until the next manual press or action in the App.Mehr erfahren
- The connected contactor is self-protected. Thus it is not necessary to install 2A-type protection on the control circuit.Mehr erfahren
- No, the C1 and C2 terminals of the connected contactor or latching relay are only dedicated to the wiring of the control circuit.Mehr erfahren