Legrand EMDX³ Smartes Lastabwurfrelais 80 A, 1-phasig inkl.Stromwandler, 100-240VAC, 1TE, EMDX³ with Netatmo
EMDX3 with Netatmo
Legrand
Legrand EMDX³ Smartes Lastabwurfrelais 80 A, 1-phasig inkl.Stromwandler, 100-240VAC, 1TE, EMDX³ with Netatmo
Best.-Nr. 412172
EAN.
3414971961920
Rabattgruppe : C04
115,85 €
/
Stück
Unverbindliche Preisempfehlung
exkl. MwSt.
Teilen
Sie können nur 4 Produkte vergleichen, Sie müssen 1 entfernen, um dieses hinzuzufügen
Technische Merkmale
Bussystem KNX | Nein |
---|---|
Bussystem KNX-Funk | Nein |
Bussystem Funkbus | Nein |
Bussystem LON | Nein |
Bussystem Powernet | Nein |
Andere Bussysteme | ohne |
Funk bidirektional | Ja |
Ausführung | Energie-Zähler |
Anschlussart | direkt |
Blindleistung | Nein |
Zulassung nach PTB | Nein |
S0 Impulsschnittstelle | ohne |
Genauigkeitsklasse | 1 |
Breite | 17.5 mm |
Höhe | 86 mm |
Tiefe | 68 mm |
Schlagfestigkeit | IK04 |
Schutzart (IP) | IP41 |
Einsatztemperatur | 0-55 °C |
Lagertemperatur | -40-70 °C |
---|---|
Spannungsart | AC |
Nennspannung | 100-250 V |
Frequenz | 50-60 Hz |
Bezeichnungsangabe der Anschlussklemmen | Ja |
Halogenfrei | Ja |
Kapazität der Klemme | 1.5-3 mm² |
Verbindungsart | Kabel |
Textfeld/Beschriftungsfläche | Ja |
USB-Anschluss | Nein |
Montageart | DIN-Schiene |
Adressierbar | Nein |
Enthält Batterie oder Akku | Nein |
Verbundenes Objekt | Ja |
Plattform zum Herunterladen von Anwendungen | Google Play Store |
Programmierbar | Ja |
Interoperabilität des Verbindungsprotokolls | Nein |
Über die Internet-Box vernetzbar | Nein |
Anwendungsname | Home + Control |
Dokumentation
4 Dokumente
Technisches Datenblatt
Technisches Datenblatt
Technisches Datenblatt
Bedienungsanleitung
4 Dokumente
Konformitätserklärung
OC / CB-FR_715847
(0.31 Mo)
Konformitätserklärung
Decl. UE RED-RED_794
(0.41 Mo)
Konformitätserklärung
Decl. UE RED-4071 A
(0.2 Mo)
Konformitätserklärung
NF-NF208_1030
(0.54 Mo)
WÄHLEN SIE EINE AKTION
FAQ
- This flashing means that there is a strong phase shift between the voltage and the rated current on your network.If your installation is single-phase, this indicates a strongly inductive load on the electrical network (swimming pool pump motor, powerful halogen lighting...), and has no impact on the correct functioning of your smart load shedder.If your installation is in three-phases, please check that the power supply of the load shedder is done via the same phase as the line on which you have installed the current transformer.Mehr erfahren
- You can only install one smart load shedder per installation.Mehr erfahren
- The smart load shedder checks every 10 seconds if the instantaneous consumption of the house allows to switch back on the shedded loads.Mehr erfahren
- If you want to modify the shedding prioritization of your loads, you just have to go to: Settings > Manage my home > Electrical panel > Smart load shedder > Configuration: Priorities. Then, you just have to switch the loads as you wish and click on "Confirm".It is also possible to add or remove devices from your priority list.Mehr erfahren
- To configure the triggering threshold of your smart load shedder, go to: Settings > Manage my home > Electrical panel > Smart load shedder > Shedding trigger.Mehr erfahren
- Due to their naming, some circuits will never be included in this list (such as "router" or "refrigerator") because offloading them would be damaging and detrimental to the user's comfort.Mehr erfahren
- There is no limit in terms of number of loads that can be managed thanks to the smart load shedder (within the limit of 100 paired products per gateway).Mehr erfahren
- Only the loads connected to "with Netatmo" connected contactors, cable outlets and sockets can be shedded.For safety reasons, the connected latching relay, whose main function is the management of several points of light (for example in staircases or corridors), cannot be shedded.Mehr erfahren
- In order to configure your contract power limit, you have to go to: Settings > Manage my home > ... > House information > My home profile: Electrical contract. You can then change your tariff, your contract power and your billing (normal or off peak/peak time).Mehr erfahren
- A load shedder continuously monitors your total electricity consumption and automatically offload non-priority circuits if you exceed your electricity contract limit. By staggering the consumption, the load shedder enables you to subscribe to a lower electricity contract. Moreover, it allows to avoid untimely power cuts.Mehr erfahren